Gps/Gps-A Operation; Gps Operation; D Sentence Formatter Setting - Icom IC-E92D Instruction Manual

8

GPS/GPS-A OPERATION

■ GPS operation

Displaying (FM/FN-N/WFM/AM/DV mode) or transmitting
(DV mode only) GPS data is available when connecting an
optional HM-175GPS (GPS speaker microphone) or 3rd
party GPS receiver*
pass through the [DATA/SP/MIC] jack of the IC-E92D.
In addition, the GPS message transmission is also available
in GPS mode operation.
*GPS receiver with RS-232C terminal is required.
* Set "GPS TX MODE" to "GPS" or "GPS-A" at r operation of right
colum when connecting a 3rd party GPS receiver.
NOTE: See p. iv about the optional
HM-175GPS outputs GPS data for
details.
to [DATA/SP/MIC]
60
(RS-232C output/NMEA format)
HM-175GPS
(optional)
to RS-232C port
(null modem
GPS
adapter is required)
receiver
OPC-1799
(Optional)

D Sentence formatter setting

q Enter "GPS TX MODE" in DV set mode.
❮MENU screen❯
. GPS data
(Push [MENU/
• GPS TX MODE screen is displayed.
w Rotate [DIAL]
e Push [ ](5)
r Rotate [DIAL]
push [ ](5)
• A total 6 sentences, RMC, GGA, GLL, GSA, VTG and GSV are
available.
t Rotate [DIAL]
y Push [
screen.
u Repeat the steps r to y to set another GPS sentence
usage.
• Up to 4 GPS sentences are usable at the same time.
i Push [MENU/
➪
❮DV SET MODE❯
†
]) (Rotate [DIAL] , then push [
GPS TX MODE GPS TX MODE
OFF OFF
r GPS GPS
GPS-A GPS-A
:SENTENCE :SENTENCE
†
to select "GPS."
†
to select GPS SENTENCE screen.
†
to select the desired GPS sentence, then
†
.
†
to turn the sentence usage ON and OFF.
](5) to return to GPS SENTENCE
(or [ ](4))
] to return to frequency indication.
(p. 102)
➪
❮GPS TX MODE❯
‡
](5) .)