Icom IC-E92D Instruction Manual page 13

KEY Pushed momentarily
• Inputs digit '7' for frequency input, memory channel selection,
etc.
7
DSQ • While pushing [PTT], this key sends the DTMF code "7."
TONE
• Inputs digit '8' for frequency input, memory channel selection,
8
etc.
TS
• While pushing [PTT], this key sends the DTMF code "8."
• Inputs digit '9' for frequency input, memory channel selection,
etc.
9
CS
DTMF.M • While pushing [PTT], this key sends the DTMF code "9."
• Inputs digit '0' for frequency input, memory channel selection,
0
etc.
CQ
• While pushing [PTT], this key sends the DTMF code "0."
• Inputs MHz digit for frequency input.
.
#
• While pushing [PTT], this key sends the DTMF code "F (#)."
CD
T.SCAN
• During DV mode operation, selects the record track for voice
REC
memory. (p. 58)
MODE
• While pushing [PTT], this key sends the DTMF code "E (✱)."
PANEL DESCRIPTION
Pushed and held for 1 sec.
• During FM/FM-N mode operation, selects repeater tone, tone
squelch, tone squelch reverse, DTCS squelch, DTCS squelch re-
verse and no tone operation in sequence. (p. 124)
• During DV mode operation, selects digital call sign squelch, digital
code squelch and no squelch operation in sequence. (p. 124)
• Selects tuning step selection. (p. 18)
• Select DTMF memory mode. (p. 117)
(Push and hold for 2 sec. while operating DV mode.)
• During DV mode operation, CALL SIGN setting mode is displayed.
(pgs. 38, 48)
• During DV mode operation, set "CQCQCQ" for station's call sign
for operation.
• During FM/FM-N mode operation, starts tone scan function.
(p. 126)
• During DV mode operation, RX CALL SIGN is displayed. (p. 46)
• Selects the operating mode. (p. 21)
2
2
5