Tv Channel Operation - Icom IC-E92D Instruction Manual

5
BASIC OPERATION

■ TV channel operation

TV channel operation is available only when TV channels
are programmed using the optional RS-92.
available for A band operation only.
D TV channel receiving
q Push [CALL] several times to select TV channels.
• " TV" and channel number appear.
w Rotate [DIAL] to select the desired channel.
• While pushing and holding [BAND], rotating [DIAL] selects the
all channels including skip channel.
[DIAL]
D Skip channel setting
Unwanted channels can be skipped for rapid selection, etc.
q Push [CALL] several times to select TV channels.
• "TV" and channel number appear.
28
(p. 135)
TV mode indication
Channel indication
+DUP +DUP DTCS DTCS
WFM WFM PRIO PRIO WX WX EMR EMR
10
25 25
A
MemoName MemoName
P SKIP SKIP
TV TV
µ
C
CALL
LOW LOW
ATT ATT
RX CS
w Rotate [DIAL] to select the channel to be skipped.
• To clear the skip setting, rotate [DIAL] while pushing and hold-
Also
ing [BAND] to select a skip channel.
e Push and hold [SKIP](5) for 1 sec. to toggle the skip set-
ting ON and OFF.
• "SKIP" appears when the channel is set as skip channel.
D
BAND
5
SKIP
D Automatic TV channel programming
TV channels can be programmed automatically.
q Push [CALL] several times
to select TV channels.
• " TV" and channel number ap-
pear.
w Push [SCAN](2) to start TV
channel programming.
• The programming will automatically stop after scanning all
channels.
[DIAL]
Appears
+DUP +DUP DTCS DTCS
WFM WFM PRIO PRIO WX WX EMR EMR
12
25 25
A
MemoName MemoName
P SKIP SKIP
µ TV TV
LOW LOW
C
ATT ATT
CALL
RX CS
+DUP +DUP DTCS DTCS
WFM WFM PRIO PRIO WX
2
A
MemoName MemoName
µ
LOW LOW
ATT ATT
WX EMR EMR
25 25
P SKIP SKIP
TV TV