Station Call Sign Programming - Icom IC-E92D Instruction Manual

7
DV MODE OPERATION
D Station call sign programming
Station call sign must be programmed to call a specifi c sta-
tion as well as for repeater operation in both digital voice and
low-speed data communications.
q Select B band as the main band.
w Enter "UR" in call sign set mode.
➪
❮MENU screen❯
(Push [MENU/ ]) (Rotate [DIAL]
• Pushing and holding [CS](9) for 1 sec. is also available to enter
call sign set mode.
• YOUR CALL SIGN screen is displayed.
YOUR CALL SIGN YOUR CALL SIGN
r
e Rotate [DIAL]
†
to select the desired call sign memory,
"U01" to "U60."
r Push [ ](6) to enter call sign programming mode.
• The 1st digit blinks.
YOUR CALL SIGN YOUR CALL SIGN
r
t Rotate [DIAL]
†
to select the desired character or code.
• Push [A/a](3) to change the character group from "AB" (alpha-
betical characters; capital letters), "12" (numbers) and "/" (sym-
bols) in sequence.
36
(p. 14)
➪
❮CALL SIGN❯ ❮UR❯
†
, then push [ ](5)
U
CQCQCQ CQCQCQ
:SET :SET :SEL :SEL
:BACK :BACK :EDIT :EDIT
CLR:CLR CLR:CLR
U01 U01 AB AB
† †
:SET :SET CLR:CLR CLR:CLR
:SEL :SEL A/a:CHAR A/a:CHAR
:CUR :CUR 0:CQ 0:CQ
y Push [ ](6) to select 2nd digit, then rotate [DIAL]
lect the desired character or code.
• Push [ ](6) to move the cursor right; push [ ](4) to move the
cursor left.
• 2nd digit blinks (1st digit stops blinking).
‡
.)
u Repeat the steps t and y to enter the desired station
call sign.
• Up to an 8-digit call sign can be set.
• If an un-necessary character is entered, push [ ](6) or [ ](4)
to select the character, then push [CLR](1) to erase the se-
lected character, or push and hold [CLR](1) for 1 sec. to erase
all characters following the cursor.
i Push [ ](5) to store the programmed call sign and re-
turns to YOUR CALL SIGN screen.
o Push [MENU/
YOUR CALL SIGN YOUR CALL SIGN
r U01 U01 AB AB
S†
:SET :SET CLR:CLR CLR:CLR
:SEL :SEL A/a:CHAR A/a:CHAR
:CUR :CUR 0:CQ 0:CQ
YOUR CALL SIGN YOUR CALL SIGN
r
U01 U01
STATION1 STATION1
:SET :SET :SEL :SEL
:BACK :BACK :EDIT :EDIT
CLR:CLR CLR:CLR
] to return to frequency indication.
†
to se-