Icom IC-E92D Instruction Manual page 67

◆ Playing-back and erasing the recorded audio
q Select DV mode in B band, and deactivate the priority
watch if activated.
(p. 91)
w Enter "TRACK" in DV voice memo set mode.
➪
❮MENU screen❯ ❮DV VOICE MEMO❯
(Push [MENU/ ]) (Rotate [DIAL]
• TRACK screen is displayed
TRACK TRACK
r TRACK:1 TRACK:1
:SEL :SEL
:BACK CLR:CLR :BACK
e Rotate [DIAL]
†
to select the desired audio track to be
played back or erased.
• "✱" is displayed beside the track number when the selected
track has been recorded.
r Push [ ](5) to play-back the recorded audio.
• Push [ ](5) again to pause, push [ ](6) to stop play-back.
t Push and hold [CLR](1) for 1 sec. to erase the recorded
audio.
y Push [ ](4) to return to DV VOICE MEMO screen.
u Push [MENU/
] to return to frequency indication.
➪
❮TRACK❯
† ‡
, then push [ ](5) .)
*
:
CLR:CLR
DV MODE OPERATION
D DV auto detect
The "DV" mode indicator blinks when a non-DV signal is re-
ceived during DV mode operation.
When a signal other than DV mode is received, the IC-E92D
DV automatic detection switches to monitor in FM mode
q Enter "AUTO DETECT" in DV set mode.
➪
❮MENU screen❯ ❮DV SET MODE❯
(Push [MENU/ ]) (Rotate [DIAL]
w Rotate [DIAL]
†
to turn the DV automatic detect function
ON and OFF.
OFF : "DV" mode indicator blinks, however the trans-
ceiver receives in DV mode even if non-DV mode
signals are received.
ON : "DV" mode indicator blinks and the transceiver
monitors the signal when receiving except DV
mode signal in FM mode.
e Push [ ](5)
to return to DV SET MODE screen
(or [ ](4))
r Push [MENU/
] to return to frequency indication.
NOTE: The received FM audio may be distorted when re-
ceiving an FM signal with DV automatic detect function.
[DIAL] ↔ [ ](2)/[ ](8)
†
7
(p. 106)
➪
❮AUTO DETECT❯
† ‡
, then push [ ](5) .)
](5) ↔ [ ](6)
‡
[
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
59