Gps Message Automatic Transmission; Received Gps Message Indication - Icom IC-E92D Instruction Manual

8
GPS/GPS-A OPERATION
D GPS message automatic transmission
q Enter "GPS AUTO TX" in DV set mode.
➪
❮MENU screen❯
(Push [MENU/ ]) (Rotate [DIAL]
• GPS AUTO TX screen is displayed.
GPS AUTO TX GPS AUTO TX
r OFF OFF
5SEC 5SEC
10SEC 10SEC
30SEC 30SEC
1MIN 1MIN
w Rotate [DIAL]
†
to select the desired position data trans-
mitting interval from 5 sec., 10 sec., 30 sec., 1 min., 3
min., 5 min., 10 min., 30 min. and OFF.
• The GPS message is also transmitted if programmed.
e Push [ ](5)
(or [ ](4))
r Push [MENU/
NOTE: Your own call sign ("MY") must be set to activate
the GPS automatic transmission.
[NOTICE]
"5SEC" cannot be selected when 4 GPS sentences are selected.
62
(p. 106)
➪
❮DV SET MODE❯ ❮GPS AUTO TX❯
†
, then push [ ](5)
to return to DV SET MODE screen.
] to return to frequency indication.
[NOTICE]
Only use GPS message automatic transmission in simplex mode.
Automatic GPS message transmission through a repeater may
interfere with other communications.
‡
.)
D Received GPS message indication
❮MENU screen❯
(Push [MENU/
q Enter "RX GPS" in message/position set mode.
• RX GPS MESSAGE screen is displayed.
w Push [ ](5)
screen.
e Push [MENU/
➪
❮MESSAGE/POSITION❯
†
]) (Rotate [DIAL] , then push [
RX GPS MESSAGE RX GPS MESSAGE
r DATA: DATA:
Call from Call from
Osaka! Osaka!
:BACK :BACK
to return to MESSAGE/POSITION
(or [ ](4))
] to return to frequency indication.
➪
❮RX GPS❯
‡
](5) .)