Tv Channel Operation - Icom IC-E7 Instruction Manual

■ TV channel operation

TV channel operation is available only when TV channels are
programmed using the optional CS-P7
(p. 61)
D TV channel receiving
q Push [V/M] (
• . ) to select VFO mode, if necessary.
SKIP S MW
w Push [BAND] (
) several times to select the TV
•
TS LOCK
channel band.
• "tV" and channel number appear.
• While pushing and holding [BAND] (
also selects the TV channel band.
e Rotate [DIAL] to select the desired channel.
• While pushing and holding [FUNC], rotating [DIAL] selects the
all channels including skip channel.
Push Push and hold
.
CLONING SOFTWARE
), rotating [DIAL]
•
TS LOCK
Dual operation
OTHER FUNCTIONS
D Skip channel setting
Unwanted channels can be skipped for rapid selection, etc.
q Rotate [DIAL] to select the channel to be skipped.
• To clear the skip setting, rotate [DIAL] while pushing and holding
[FUNC] to select a skip channel.
w While pushing and holding [FUNC], push [V/M]
) to toggle the skip setting ON and OFF.
( • .
SKIP S MW
• "SKIP" appears when the channel is set as skip channel.
D Automatic TV channel programming
TV channels can be programmed automatically.
➥ Push and hold [CALL] (
MODE
channel programming.
• The programming will automatically stop when scanning all
channels.
11
) for 1 sec. to start TV
•
SCAN
11
62