I Tv Channel Operation; Skip Channel Setting - Icom IC-91A Instruction Manual

5
BASIC OPERATION

I TV channel operation

TV channel operation is available only when TV channels are
programmed using the optional RS-91.
for A band operation only.
D TV channel receiving
q Push [CALL] several times to select TV channels.
• "TV" and channel number appear.
w Rotate [DIAL] to select the desired channel.
• While pushing and holding [BAND], rotating [DIAL] selects the
all channels including skip channel.
D Skip channel setting
Unwanted channels can be skipped for rapid selection, etc.
q Push [CALL] several times to select TV channels.
• "TV" and channel number appear.
28
Also available
(p. 122)
[DIAL]
TV mode indication
Channel indication
10 ch
µ
w Rotate [DIAL] to select the channel to be skipped.
• To clear the skip setting, rotate [DIAL] while pushing and holding
[BAND] to select a skip channel.
e Push and hold [SKIP](5) for 1 sec. to toggle the skip set-
ting ON and OFF.
• "SKIP" appears when the channel is set as skip channel.
25
D Automatic TV channel programming
TV TV
TV channels can be programmed automatically.
q Push [CALL] several times to
select TV channels.
• "TV" and channel number ap-
pear.
w Push [SCAN](2) to start TV
channel programming.
• The programming will automati-
cally stop after scanning all channels.
[DIAL]
Appears
12 ch
25
TV TV
µ
2 ch
µ
25
TV TV