Auto Power-Off Function; Tv Channel Operation - Icom IC-P7A Instruction Manual

11
OTHER FUNCTIONS

■ Auto power-off function

The IC-P7A can be set to automatically turn OFF after a spec-
ified period in which no operation is performed.
120 min., 90 min., 60 min., 30 min. and OFF can be specified.
The specified period is retained even when the transceiver is
turned OFF by the auto power-off function. To cancel the
function, select "OFF" in step e below.
qWhile pushing and holding [FUNC], push and hold
[SQL] ( • ) for 1 sec. to enter set mode.
ATT SET
w Rotate [DIAL] to select "AP OFF."
• Turn the expanded set mode ON for selection. (p. 39)
SCAN
S.MW
SET
SET
eWhile pushing and holding [FUNC], rotate [DIAL] to select
the desired time or to turn the function OFF.
r Push [SQL] (
•
ATT SET
63
EXPANDED SET MODE
USING
[DIAL]
WFMAM - DUP
T SQL DTCS
VOL PRIO P SKIP
MR
LOW 1 5 9
After 1 sec.
WFMAM - DUP
T SQL DTCS
VOL PRIO P SKIP MR
LOW 1 5 9
) to exit set mode.

■ TV channel operation

TV channel operation is available only when TV channels are pro-
grammed using the optional CS-P7
D TV channel receiving
q Push [V/M] (
w Push [BAND] (
channel band.
• "tV" and channel number appear.
• While pushing and holding [BAND] (
also selects the TV channel band.
e Rotate [DIAL] to select the desired channel.
• While pushing and holding [FUNC], rotating [DIAL] selects the
all channels including skip channel.
D Skip channel setting
Unwanted channels can be skipped for rapid selection, etc.
ATT
q Rotate [DIAL] to select the channel to be skipped.
• To clear the skip setting, rotate [DIAL] while pushing and holding
[FUNC] to select a skip channel.
w While pushing and holding [FUNC], push [V/M]
) to toggle the skip setting ON and OFF.
( • .
SKIP S MW
ATT
• "SKIP" appears when the channel is set as skip channel.
D Automatic TV channel programming
TV channels can be programmed automatically.
➥ Push and hold [CALL] (
channel programming.
• The programming will automatically stop when scanning all
channels.
CLONING SOFTWARE
• . ) to select VFO mode, if necessary.
SKIP S MW
) several times to select the TV
•
TS LOCK
•
TS LOCK
) for 1 sec. to start TV
•
MODE SCAN
. (p. 61)
), rotating [DIAL]