Avaya S6200 Administration And Maintenance page 77

Table 16: Flex Configuration Settings (continued)
System Administrator
Main Menu >
Configure Scheduler
Configure Scheduler
Configure Scheduler
Configure Scheduler
Configure Scheduler
Configure Scheduler
Configure Scheduler
Parameter / Setting
Originator Dial Out
(ODO) = Unsecured
—or—
(ODO) = All
Warning Tones =
Enabled
Conference Scheduler
Flex Short Time
Flex Short Attempts
Flex Long Time
Flex Long Attempts
Flex Configuration Settings
To
The Unsecured setting enables leaders
to access available system channels for
dial-outs. The All setting enables
moderators to dial out for both secured
and non secured conferences.
Note: The ODO Allow parameter for
dial-out channels must be set to ON
(Default).
Enable warning tones that signal that a
conference is nearing completion
Enable/disable the Conference
Scheduler or auto hang up.
Specify whether the system disconnects
or routes: callers who enter an invalid
code to the Enter queue, call in at the
wrong time, call in to a secured (locked)
conference, or call in to a full conference.
Set the scan time (in seconds) and the
number of scan attempts.
Defines the number of seconds the user
is allowed to enter a single DTMF digit.
Sets the number of attempts the user is
allowed to enter a single DTMF digit after
a prompt.
Specifies the umber of seconds the user
is allowed to enter a sequence of DTMF
digits.
Defines the number of attempts the user
is allowed to enter a sequence of DTMF
digits after a prompt.
Issue 1
2 of 3
August 2007 77