Table 11: System Configuration Parameters (continued)
Parameter
Auto Extend Ports
Description
Specifies whether the system is able to allocate additional conferee
ports (lines) to unattended conferences while they are in progress.
OnDefault — The system attempts to allocate additional ports
l
to accommodate additional conferees as required.
Successful allocation of ports depends on the availability of
(non-reserved) ports. This setting can be changed in the
Conference Scheduler on a per-conference basis.
OffDefault — The system does not attempt to allocate
l
additional ports. You can change this setting in the
Conference Scheduler on a per-conference basis.
OFF (default) — The system does not attempt to allocate
l
additional ports. This setting cannot be changed in the
Conference Scheduler
Note: Auto Extend Ports is not supported for Flex Conferences.
System Configuration
5 of 16
Issue 1
August 2007
51