Avaya S6200 Administration And Maintenance page 71

Table 14: Blast Dial Parameters (continued)
Parameter
1
Invalid Code
Scan Time
1
(5 to 20)
CLPG Timeout
(0, 30 to 600 s)
1 Invalid Code and Scan Time apply to coded blasts only.
Description
The system response to conferees who enter an invalid
access code or conferees who do not enter the digits within
the time allowed. (The Scan Time parameter specifies the
allowed time.)
ENTER (default) — The conferee is placed in the
l
Enter Conference to wait for operator assistance.
Hang-up — The system disconnects the caller.
l
Note: The Invalid Code setting also specifies the system
response to conferees entering codes for Secured blast
conferences.
The number of seconds (5 to 20) the system scans for
additional access code digits after a conferee enters the first
digit. The default is 20 seconds.
Be sure to adjust this parameter to accommodate the
longest access code on your system.
Specifies what happens to lines that remain in the Call
Progress (CLPG) state after a blast dial. (Some lines may
remain in the CLPG state because no one answers the blast
dial, or the conferee fails to enter digits.)
30 to 600 (seconds) — The system automatically
l
hangs up lines remaining in the CLPG state beyond
the specified time. This includes conferees using
rotary phones, who cannot activate the scan timer.
0 (default) — There is no timeout. Lines remain in the
l
CLPG state until an operator accesses the line or
clears or exits Blast Dial, which hangs up all lines in
the CLPG state.
!
CAUTION:
Specify a timeout value when the Auto Blast
CAUTION:
feature is used to ensure that lines are
cleared when operators are not available to
clear the lines.
Blast Dial Parameters
2 of 2
Issue 1 August 2007 71