Avaya S6200 Administration And Maintenance page 48

Configuring System-Wide Settings
Table 11: System Configuration Parameters (continued)
Parameter
Exit Tone
DTMF
Acknowledge
Transaction Logs
Automatic CDR
Print
48 Administration and Maintenance of the S6200/S6800 Servers
Description
Specifies the number of beeps in an exit tone when a participant
exits a conference. Exit tones are specified for conferences on a
per-conference basis. Operators can enable exit tones in an
attended conference, and exit tones can be specified for scheduled
conferences.
Single Beep (default)
l
Double Beep
l
Specifies whether or not systems sounds a tone when it receives
DTMF (Dual-Tone Multi-Frequency) dialing input.
ON — The system emits a tone when conferees press valid
l
DTMF digits on their telephones to either enter a response to
a poll question or to place themselves in either the Help or
Q&A queues. Acknowledgment tones assure conferees that
the system received their DTMF input.
OFF (default) — Conferees hear normal DTMF tones as they
l
press digits, but do not hear the special acknowledgment
tone afterward.
Specifies whether or not the system generates Operator
Transaction logs.
ON (recommended) — The system generates transaction logs.
OFF (default) — The system does not generate transaction logs.
See Operator Transaction Logs
Specifies whether the automatic call detail record (CDR) and
conference detail record (CODR) exporting feature is enabled. This
feature can be configured to process (for example, print) records in
real-time: See Real-time CDRs and CODRs
LAN — The system exports CDRs across the LAN to a client
l
in real-time. You must re-initialize the system after setting this
value to put it into effect (see
page 128).
OFF (default) — The system does not automatically generate
l
real-time CDRs and CODRs.
on page 178 for more information.
on page 246
System Re-Initialization on
2 of 16