Avaya S6200 Administration And Maintenance page 142

Configuring Conference Scheduler
At installation time, the chdbased.reg file contains the following default settings:
[xmldatasource]
version=1.0
bridgeid=spectel700
address=localhost
URI=/epvtest
pingURI=/epvtest/ping.htm
cmdURI=/epvtest/epvcmd.html
port=80
timeout=10
connections=1
test=false
Table 26 describes the attributes and settings in the chdbased.reg file. Use the information in
this table to edit the chdbased.reg settings for your configuration.
Table 26: chdbased.reg Attribute Settings
Attribute
Version
BridgeId
Address
URI
PingURI
cmdURI
Port
Timeout
142 Administration and Maintenance of the S6200/S6800 Servers
Description
Current version of the protocol.
One to 63 characters identifying the bridge name.
The IP address or name of the EPV server.
The Universally Recognized Identifier is used for passcode
validation requests. Entries in this field are limited to 127
characters.
The URI points to either an HTML page for a production system,
or to a directory on the HTTP server for a test environment.
Points to page containing the keep alive response. Entries in
this field are limited to 127 characters.
The URI that defines where the system sends the conference
attribute updates.
Currently only updates to the Leader PIN are supported.
The Port the system connects to on the HTTP server. 80 is the
default for HTTP.
The amount of time in seconds to wait for a response from the
EPV server.
1 of 2