Avaya S6200 Administration And Maintenance page 279

Meeting exchange 5.0 media server
Hide thumbs Also See for S6200:
Table of Contents

Advertisement

Table 52: Status Message Definitions (continued)
Message
Code
Message
0152
Socket connected to host 'host-name' at
IP address IP-addr
0153
Closing socket connection to host
'host-name' at IP address IP-addr
0154
Lost socket connection to host
'host-name' at IP address IP-addr
0155
Received bad 'cmd-string' command
from host 'host-name' at IP address
IP-addr
0156
:Closing socket, IP address IP-addr not
found in '/etc/hosts' file
0157
Bad Parameters Passed For DigConf.
Rec/Play
0158
Could Not Allocate Annunciator For
DigConf. Rec/Play
0159
DigRP Channel %c - Already In Use
0160
Could Not Return DigRP Annunciator %d
to Annunciator Conf.
0161
Bad DigConf. Rec/Play Mode, DigRP
Channel %c, Conf. %d
0162
Error Starting DigConf. Rec/Play, DigRP
Channel %c, Conf. %d
0163
Error Stopping DigConf. Rec/Play, DigRP
Channel %c, Conf. %d
0164
DigRP Request %s on DigRP Channel
%c - Not In Use
Meaning
A LAN process has accepted a socket
connection to host host-name at IP address
IP-addr.
A LAN process is purposely closing a socket
connection to host host-name at IPaddress
IP-addr. Either the LAN process is being shut
down or an error has occurred on the socket
connection. A previously logged error message
from the LAN process may indicate the reason.
A LAN process lost a socket connection to host
host-name at IP address IP-addr. Either the
indicated host closed the connection or the
connection timed out due to a LAN hardware
problem
A LAN process received an invalid ASCII text
command cmd-string over a socket connection
from host host-name at IP address IP-addr.
Cmd-string is either an invalid command or it
has an invalid format or length and cannot be
processed.
A LAN process closed a socket connection to a
remote host at IP address IP-addr because no
entry was provided in the /etc/hosts file for that
host to be allowed access to that service.
Incorrect information entered by operator and
not trapped in operator screen.
Operator requested DigRP channel but it was
allocated for another function after the request
and before it was put into conference.
Indicates that a DigRP channel was not
stopped before it was moved to another
conference.
Indicates an internal DigRP processing/
database error conditions.
Indicates an internal DigRP processing/
database error conditions.
Indicates an internal DigRP processing/
database error conditions.
Indicates an internal DigRP processing/
database error conditions.
Indicates an internal DigRP processing/
database error conditions.
System Messages
6 of 7
Issue 1
August 2007
279

Advertisement

Table of Contents
loading

This manual is also suitable for:

S6800

Table of Contents