Avaya S6200 Administration And Maintenance page 58

Configuring System-Wide Settings
Table 11: System Configuration Parameters (continued)
Parameter
Date Format
Time Format
PIN Mode
Conference
Passcode
(Flex Only)
58 Administration and Maintenance of the S6200/S6800 Servers
Description
Specifies one of the following system date formats:
US standard date format (default): mm/dd/yyyy
l
An alternate format: yyyy/mm/dd
l
International format: dd/mm/yyyy
l
Note: Date Format has no effect on date formats in CDRs and
CODRs.
Specifies whether a 12-hour (default) or 24-hour clock format is
used for all time references on the bridge, including system time,
schedule times, and operator screens.
Note: Time Format has no effect on time formats in CDRs and
CODRs.
Specifies PIN code requirements for unattended conferences
scheduled on the system.
Optional (default) — Callers are not required to enter a PIN
l
code, however they may enter one. They must press the
pound key (#) in response to a PIN code prompt.
Required — Callers are required to enter a PIN code in
l
response to a PIN code prompt. The PIN code does not have
to be unique per conferee, for example one pin code per
conference.
Unique Required — Callers are required to enter unique PIN
l
codes (a unique PIN code for each caller).
!
Important:
This option is not available if PIN codes are not
Important:
installed.
Allows for an additional passcode that participants enter to join a
Flex conference. A leader creates the passcode using DTMF
commands when starting the conference; however, the system
does not save the passcode after the conference ends.
For more information, see Appendix A in the Bridge Talk User's
Guide.
12 of 16