Avaya S6200 Administration And Maintenance page 284

System and Log Messages
Table 55: Linux System Error Messages (continued)
Message Code
3115
3117
3118
3200
3201
3202
3203
3204
3304
3305
3306
3307
3400
3401
3402
3501
284 Administration and Maintenance of the S6200/S6800 Servers
Message
Cannot get/set controls for device
Cannot extend RTFS file name
Cannot write/read RTFS file name
Cannot execute process
Cannot start name process
Failed to create process for name
Process '%s %d' %s
Process '%s %d' Respawning Too
Rapidly
Cannot initialize alarm database
Cannot map dual-port memory
Out of memory for announcement
%d
Out of memory
Cannot initialize shared memory
Cannot initialize shared database
Cannot open shared database
Rt_lock error
Meaning
An attempt to read or write control
information for the specified
device failed.
An attempt to increase the size of
the specified real-time file failed.
An attempt to perform the
specified operation on the named
file failed.
An attempt to start execution of
the specified process failed.
An attempt to start execution of
the specified process failed. A
previous log message gives more
details.
The specified process could not
be created for execution.
Receive a SIGCLD signal on
specified process.
The system terminated
respawning of a dead process.
An attempt to initialize the alarm
database failed.
A failed attempt to write the
reference memory using the
dual-port memory defining DSo
timeslots for use by the transmit
PLD on the MVIP bus.
No memory was available for use
by the specified announcement.
No memory was available for
internal use by a process.
Could not initialize (latch onto) the
shared database. System
probably not running.
An error occurred while trying to
latch onto the shared database.
A process was unable to access
the shared database.
A process was unable to lock itself
into memory for quick response to
external events.
2 of 3