Avaya S6200 Administration And Maintenance page 134

Configuring Conference Scheduler
Table 25: Conference Scheduler Configuration Parameters (continued)
Parameter
Conference
Secured
Max. Lines
Reached
Invalid Time of
Day
Scan Time
Scan Attempts
134 Administration and Maintenance of the S6200/S6800 Servers
Description
Specifies the system response to callers entering valid codes
for conferences that have been secured by a moderator (no
one, including operators, can enter, monitor, or record a
conference).
Enter (default) — The system routes callers to the
l
Enter Queue.
Hang-up — The system disconnects callers.
l
Moderators press *7 on their telephone keypad to secure a
conference. See the Bridge Talk User's Guide for more
information on moderator and conferee keypad commands.
Defines the system response to callers who enter a valid code
for a conference that contains the specified maximum number
of lines.
Enter (default) — The system places callers in the
l
Enter Queue.
Hang-up — The system disconnects callers.
l
You specify the maximum number of lines when you schedule
a conference.
Specifies the system response to callers who enter a valid
code at the wrong time (attempt to enter a conference too
early or too late).
Enter (default) — The system routes callers to the
l
Enter Queue.
Hang-up — The system disconnects callers.
l
Specifies the number of seconds the system scans for code
digits entered by callers.
The default is 10 seconds.
The valid time range is 5 seconds to 20 seconds.
Be sure to allow an adequate scan time for lengthy codes.
Note:
Callers can press the pound key (#) after
Note:
entering their code to immediately enter the
conference without waiting for the full scan
time to elapse.
Specifies the number of times the system prompts for a code,
1, 2, or 3 (default) times.
2 of 6