Avaya S6200 Administration And Maintenance page 69

Consider the following before changing the system's date and time:
The system retains all configuration data, including the date and time, during power
l
outages.
If you select the System Date/Time option while conferences are active, the system
l
displays a warning message and sounds a warning tone. Exit without changing the date/
time setting.
The system automatically adjusts the system time and date for Daylight Savings at the
l
appropriate time on the proper date. However, if the system is powered down, the time
and date revert to the previous time and date settings. Therefore, we recommend that you
save the new system date and time each time an automatic time change occurs.
The system time can be automatically synchronized with an external time source that
l
supports Network Time Protocol (NTP). Contact your Support representative for additional
information.
If you change the date while the conference scheduler is running, the system displays the
l
Updating Database
Updating Database
To change the date or time or both:
1. Select System Administrator Main > System Date/Time.
The system displays the
System Date/Time
When conferences are active, the system displays this warning message.
System Date/Time Warning
+-------------------------Warning-----------------------+
¦ Conferences are active! Changing the Date/Time will
¦ affect CDRs and timers. It is highly recommended that ¦
¦ you wait until all conference activity has stopped
+-------------------------------------------------------+
message:
+------------ ---Updating Database ------------+
¦
¦ The conference scheduler database is being
¦ updated. This may take up to 60 seconds.
¦ Please wait...
+------------- --- ESC to Exit ----------------+
System Date/Time.
+-------System Date/Time--------+
¦
¦ Date (mm/dd/yyyy): 03/16/2006 ¦
¦ Time (hh:mm)
+--------- ESC to Exit ---------+
System Date and Time
¦
: 07:28 ¦
¦
Issue 1
¦
¦
¦
¦
August 2007 69