Avaya S6200 Administration And Maintenance page 49

Table 11: System Configuration Parameters (continued)
Parameter
Automatic Conf.
Clear
Attended ODO
First Person
Message
Description
Specifies whether the system automatically clears attended
conference settings when a conference ends. The system
generates a CODR and a Conference Report for a conference only
after that conference has been cleared.
ON — The system automatically clears conference settings
l
when the last participant exits an attended conference.
Settings cleared include: Entry Tone, Exit Tone, Gain, ID,
Lecture, Links, Lock, Music, Name, Note, Playback, Record,
Security, and Time information.
OFF (default) — An operator must run the Conference
l
Clear_all command in Bridge Talk to remove features from
completed attended conferences.
See the Bridge Talk User's Guide for details.
Note:
The system automatically clears unattended
Note:
conferences regardless of this setting.
Defines whether or not moderators are able to use their telephones
to access an open line to dial out to add participants to an active
conference. This is useful for contacting conferees who cannot dial
in.
ON — An attended-conference moderator can use Originator
l
Dial Out (ODO), if there is a free channel configured for ODO
Allow. See Call Routing Configuration
information on enabling the ODO Allow parameter.
OFF (default) — An attended-conference moderator cannot
l
use ODO.
The system restricts ODO to one moderator at a time per
conference.
Specifies whether the system plays message 221; "You are the first
participant in this conference", when the first conferee enters a
conference.
ON — The message is played.
l
OFF — The message is not played.
l
System Configuration
on page 84 for
3 of 16
Issue 1 August 2007 49