Table of Contents
Advertisement
Managing Reports
Table 43: CDR Field Specifications (continued)
Field
DNIS Digits
Transfer
Reconnect
PIN Code
Access
Time
224 Administration and Maintenance of the S6200/S6800 Servers
Size
Options
16
OFF, ON
1
OFF, ON
1
OFF, ON
16
OFF, ON
8
OFF, ON
Description
DNIS/DDI digits that match an entry
in the Call Branding table for dial-in
calls processed by the system's Call
Routing feature.
Indicates whether a line was
transferred by the operator to the
specified conference from another
conference.
Y — The line was transferred.
N — The line was not transferred.
Transferred lines have at least two
CDRs because the system issues a
separate CDR each time a conferee
transfers to a conference. All but the
first CDR show a Y in the transfer
field; all but the last CDR show
disconnect reason 20 in the Disc
Reason field.
Indicates whether a line
disconnected and then reconnected
to the system.
Y — The line was disconnected
then reconnected.
Operators must use the Reconnect
command to flag reconnected lines.
A reconnected line has two CDRs,
with the CDR from the second
connection showing Y in the
reconnect field. The field is blank if
a line was not reconnected.
PIN code required for a line. This
field applies only to unattended
conferences with PIN codes
enabled.
Includes the time that an operator
first accessed a dial-in line after it
entered the system, allowing
administrators to distinguish
between the time a call entered the
system, was first accessed by an
operator, and was placed in a
conference. The field is blank if the
line was never accessed or was a
dial-out call.
Output Example
9785556255
Y or N
Y
4321
hh:mm:ss
e.g. 08:55:30
6 of 8
Advertisement
Table of Contents
