Quick Start for Hardware Installation Avaya S8500 Media Server 555-245-701 Issue 5.1 June 2006 700413412...
Page 2
Avaya Inc. can assume no liability for any errors. the following Web site: Changes and corrections to the information in this http://www.avaya.com/support...
Process and Specifications 1 Verifying the Equipment 2 Installing the Hardware 3 Connecting the Cables 4 Configuring the UPS and the Ethernet Switch 5 Connecting the Laptop 6 Connecting to Port Networks 7 Troubleshooting Hardware Specifications Weight Dimensions Equipment English (lb) Metric (kg) English (in) Metric (cm)
Page 4
Customer System Filled-out Electronic network administration Pre-Installation Worksheet (EPW) Caution! Warning! Antistatic wrist Do not pinch Use 2 people ground strap fingers to lift equipment required 85qsclgn LAO 102805 Quick Start for Hardware Installation: Avaya S8500 Media Server...
Installing the Hardware: Dual NIC* (S8500B) *Optional 85qs2d LAO 040406 *Grasp the NIC by the top edge or upper corners and align it with the PCI-2 expansion slot. Issue 5.1 June 2006...
Page 8
Installing the Hardware: Rail Installation to the S8500B d is d is 85qs2f LAO 102805 *Rail holes must be M6 (6 mm) or larger. **Make sure that the pins are fully extended through the mounting flange. Quick Start for Hardware Installation: Avaya S8500 Media Server...
Page 9
Installing the Hardware: Rail Installation to the S8500C 85cqsc2f LAO 033006 Issue 5.1 June 2006...
Installing the Hardware: Rack Installation (S8500B) LNK COL Tx Rx FDX Hspd LAG PoE ROUT SYS PWR 5 ft (1.5 m) 85qsc2h LAO 030905 Can be customer supplied Quick Start for Hardware Installation: Avaya S8500 Media Server...
Page 11
Installing the Hardware: Rack Installation (S8500C) CD-RW LNK COL Tx Rx FDX Hspd LAG PoE ROUT SYS PWR 5 ft (1.5 m) 85cqsc2h LAO 033006 Issue 5.1 June 2006...
CABLE TO LOWER UNIT 50-57V 8A max (If non-dedicated control network) Rear Front 85qsc3b LAO 042905 Note: Be sure to connect the modem to the USB port of the SAMP. Note: Quick Start for Hardware Installation: Avaya S8500 Media Server...
Page 13
Connecting the Cables (S8500C) Slot 2 Slot 1 CD-RW LNK COL Tx Rx FDX Hspd LAG PoE X360STK ROUT SYS PWR CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT 50-57V 8A max (If non-dedicated control network) Rear Front 85cqsc3b LAO 033006 Note: Be sure to connect the modem to the USB port of the SAMP.
Page 14
Configuring the UPS* (S8500B) *If Avaya-supplied X360STK CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT 50-57V 8A max 85qsc4a LAO 030905 Quick Start for Hardware Installation: Avaya S8500 Media Server...
Page 15
Configuring the UPS* (S8500C) *If Avaya-supplied Slot 2 Slot 1 X360STK CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT 50-57V 8A max 85cqsc4a LAO 033006 Issue 5.1 June 2006...
Page 16
LNK COL Tx LNK COL Rx FDX Hspd LAG PoE X360STK ROUT SYS PWR ROUT SY CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT 50-57V 8A max CONSOLE 85qsc4b LAO 030905 Quick Start for Hardware Installation: Avaya S8500 Media Server...
Page 17
Configuring the Ethernet Switch* (S8500C) *If Avaya-supplied Front Rear Slot 2 Slot 1 CD-RW LNK COL Tx LNK COL Rx FDX Hspd LAG PoE X360STK ROUT SYS PWR ROUT SY CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT...
CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT 50-57V 8A max 85qsc5b LAO 121605 Important! Stop here if the media server is not being connected to a port network. Quick Start for Hardware Installation: Avaya S8500 Media Server...
Page 19
Connecting the Laptop (S8500C) Slot 2 Slot 1 X360STK CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT 50-57V 8A max 85cqsc5b LAO 033006 Important! Stop here if the media server is not being connected to a port network. Issue 5.1 June 2006...
● Does the UPS have power? ● Push the power button on the media server to start ● ● No V on the IPSI LCD Check the connection to the network Quick Start for Hardware Installation: Avaya S8500 Media Server...