Avaya S6200 Administration And Maintenance page 60

Configuring System-Wide Settings
Table 11: System Configuration Parameters (continued)
Parameter
Dial String
PreDial Delay
Period
DTMF Conf.
Hangup
Log User
Transaction
60 Administration and Maintenance of the S6200/S6800 Servers
Description
Details the DTMF digits that are sent to the external recording
device after the recorder answers the call. Some of the information
contained in the Dial String may be vendor specific. Some
information may be derived at run time.
Use these values in the string to specify run-time values:
%P—expanded at run time to contain the conference
l
passcode.
%T—expanded at run time to contain conference start time in
l
Linux time format (seconds since 1/1/1970).
%C—expanded at run time to contain conference
l
confirmation number.
For example, imagine the Dial String is set to
Assume the Passcode is 1234, the conference starts on April 3,
2002 at 9:58 AM, and the confirmation number is 123456789012.
Under these conditions, the bridge sends the string
*000#*1234#*1049381888#*123456789012## to the external
recording device.
Designates number of seconds the system waits before sending a
Dial String to the external server. Maximum setting is 50.
Bridge-wide setting that controls whether the conference ends when
a moderator hangs up using DTMF.
Enabled—The conference leader may end the conference
l
using DTMF.
Disabled—the conference leader will not be able to end the
l
conference using DTMF.
Identifies whether the system will log all of a caller's DTMF actions
and the system's responses.
OFF (default)—The system will not create a User Transaction
l
log.
ON—The system writes caller DTMF and the system's
l
responses to a User Transaction log (text file).
For additional information refer to
*000#*%P#*%T#%C##
Log Files on page 171.
.
14 of 16