Avaya S6200 Administration And Maintenance page 62

Configuring System-Wide Settings
Table 11: System Configuration Parameters (continued)
Parameter
Flex Leader Code
MoHang Msg Dest
Conf Sec Msg Dest
NRP Seconds
Web ID Length
DTMF Conf Hangup
62 Administration and Maintenance of the S6200/S6800 Servers
Description
Provides the option to have leader join a Flex flow conference upon
entry of one conference code instead of the two required by default.
ON - Leader joins conference upon entry of one code.
l
Note:
Code must be unique
Note:
OFF - Default requirement of two codes for leader entry to
l
Flex flow call
Determines if a message plays to moderator or to conference when
moderator presses *98 to change the conference hangup option
INDVL - Message plays to moderator only
l
CONF - Message plays to entire conference
l
Determines if message plays to moderator or to conference when
moderator presses *7 to change conference security setting
INDVL - Message plays to moderator only
l
CONF - Message plays to entire conference
l
The # terminator after recording your name for NRP is optional.
Setting can be from 0 to 16.
0 - # is required to join conference after stating name (default)
l
1-16 - Number of seconds system waits to automatically
l
place line into conference
Tip:
Recommended setting is 3
Tip:
The number of digits moderator can enter to associate a Web
conference with the audio conference. Limit is 16.
Determines if moderator can hang up their conference via DTMF
ENABLED - Moderator can press ## to hang up conference
l
DISABLED - DTMF conference hangup not available
l
16 of 16