Avaya S6200 Administration And Maintenance page 220

Managing Reports
Table 43: CDR Field Specifications (continued)
Field
Call
Duration
Line Name
Mod.
Status
Phone
220 Administration and Maintenance of the S6200/S6800 Servers
Size Options
4 OFF, ON
20 OFF, ON
1 OFF, ON
11, OFF,
20, short (11),
or 40 medium
(20), long
(40)
Description
Total time the line was connected to
the system, rounded down to the
nearest minute with a 1-minute
minimum.
Because call duration represents a
line's entire activity on the system
— including minutes spent with an
operator (or in the Enter Queue) —
it typically exceeds the time
indicated by the Conf Minutes field.
For an attended conference, the
Line Name is the name entered by
the operator in'Bridge Talks Line
Detail dialog box.
For an unattended conference, the
information depends on whether
PIN codes were used for the
conference. If PIN codes were not
used, the Line Name is the security
(access) code of either the
conference or the moderator. If PIN
codes were used, the Line Name is
the PIN code of the caller.
For DNIS/DDI calls processed by
the system's Call Routing feature,
the line name is taken from the
corresponding Call Branding table
entry.
Indicates whether a line had
moderator status at any time during
the conference.
Conferee phone number stored on
the system along with other
conferee data (dial lists for fastdials
and blasts, the PIN code database).
Options for the this field let you
choose the length that best meets
your requirements — SHORT (11
digits), MEDIUM (20 digits), LONG
(40 digits), or OFF (0).
(The phone number from which a
caller actually dials is represented
by the Calling Phone parameter.)
Output Example
150
Sales Rep 1 or
4321
Y or N
978-555-3456
2 of 8