Table of Contents
Advertisement
Table 15: Operator Configuration Parameters (continued)
Parameter
Channel
Term
Prompt
For information on printing operator configuration files, see
information on viewing operator configuration files, see
Description
Displays the FDAPI Operator channel or lets you specify a
revenue channel number.
This parameter displays the FDAPI Operator channel
l
number if the Remote parameter is set to N.
This parameter lets you enter a channel number from the
l
available revenue channels on your system if the Remote
parameter is set to Y. When you specify a channel for this
field, the Answer setting in the Inbound Port Group
configuration file is ignored and this channel is able to
answer incoming calls. See
information.
Because this channel is specified for operator audio, this channel
should not be included in a hunt group.
Not implemented
Operator Audio Paths
answer
on page 81 for more
Printing files
on page 161. For
Viewing files
on page 162.
Issue 1
2 of 2
August 2007
75
Advertisement
Table of Contents
