Avaya S6200 Administration And Maintenance page 261

If Change Conf Opt is scheduled for a conference, the system immediately prompts the
l
leader to press 1 to start the conference. However, the leader can press 2 to change
several conference options before the conference starts. After changing options, the
leader can press 1 to start the conference.
If Change Conf Opt is not scheduled for a conference, the system places the leader
l
directly into the conference after playing a "Your conference call will now begin." message.
Table 48 describes the default touchtone commands used to modify conference settings.
Table 48: Default flex touchtone commands to modify conference settings
Press
1
*
2
Administration and Maintenance of the CS700/CS780 Audio Conferencing Server
Feature Description
Conference Start the conference.
Start
After pressing 1, the leader can select from the following
options:
l
l
(Continued)
Conference If participants enter the wrong code, the system plays an
Start "I'm sorry, the entry is invalid. Please re-enter your
passcode followed by the pound sign." message.
"Your conference passcode is <entered code>. To
(Continued)
change this entry, press star now." message. This
message confirms your passcode.
If no keys are pressed, the system places the leader into
the conference.
Adding a conference passcode affects only the current
conference but does carry over to future conferences.
Edit options Change conference options.
Managing flex conferences using touchtone commands
Press star (*) to omit an additional conference
passcode requirement.
If the leader presses *, the system places the
leader into the conference and plays an "A
conference passcode will not be required for this
conference." message.
A leader who does not press star (*) can enter an
optional participant passcode (from 4 to 9 digits)
followed by the pound sign (#). The system plays
the following messages:
"Please enter the conference passcode followed by
the pound sign." message to participants dialing in.
1 of 2
261
August 2007