Avaya S6200 Administration And Maintenance page 278

System and Log Messages
Table 52: Status Message Definitions (continued)
Message
Code Message
0136 Warm restart requested but network
device not configured
0139 Operator database updated
0141 Network database updated
0142 Possible %d CDR(s) Lost For Channel
%d
0143 Auxiliary Channel %s Unavailable
0144 Auxiliary Channel %s Available
0146 • Unattended database group name,
• file created
• file deleted
• group config. updated
• %d codes added
• %d codes changed
• %d codes deleted
0147 Possible %d CODR(s) Lost For
Conference %d
0148 Conference activity screen window is full
0149 Duplicate DTMF Digits in digits.txt, %s
and %s
0150 Digit Collection Error, Channel %d,
Status %d , Digits %d
0151 Call Branding Database Updated.
278 Administration and Maintenance of the S6200/S6800 Servers
message:
Meaning
A system re-initialization was started, but when
the system came up the network boards had
reset. This could occur during the
re-initialization due to board installation
problems.
Database updated.
Database updated.
Indicates an internal queuing problem has
occurred and CDRs/CODRs may have been
lost. Will only occur under an extreme load
condition.
Indicates that channels on the FDAPI have
gone out of service.
Indicates that channels on the FDAPI have
gone into service.
Database updated.
Indicates an internal queuing problem has
occurred and CDRs/CODRs may have been
lost. Will only occur under an extreme load
condition.
Conference has so many CDRs associated
with it, that the maximum number of lines has
been reached.
Indicates that the 'digits.txt' file has been
modified and that an error has occurred in the
definition of the indicated digits. Two digit
events are defined to have the same DTMF
digit
Indicates that insufficient DNIS digits have
been collected. The channel, collection status
(Timeout, Error), and digits collected are
variables.
Database updated.
5 of 7