Panel Description; Front Panel - Icom VE-PG4 Installation Manual

1
BEFORE USING THE VE-PG4

Panel description

■ Front panel

INDICATORS
[PWR] ���������
1
[4G/3G] ���������
2
[PPP] ����������
3
[RoIP] ���������
4
[VoIP] ����������
5
[D-TRX1] ~ [D-TRX4] ���
6
18 17 16 15
Lights green: Power is ON
Blinks green: Booting up
Blinks red:
Not lit:
Lights green: RSSI level 2 or more in the 4G mode
Blinks green: RSSI level 0 ~ 1 in the 4G mode
Lights red:
Blinks red:
Not lit:
Lights green: Authenticated to a 4G or 3G line
Not lit:
Lights green: In audio/data communication with IP transceivers
Lights orange: In audio/data communication with IP transceivers
Lights red:
Not lit:
Lights green: Registration succeed (All entries)
Blinks green: 1 or more phone lines are communicating
Blinks red:
Not lit:
Lights green: In the communication with digital transceivers.
Lights orange: In the communication with digital transceivers.
Lights red:
Not lit:
1 2 3 4 5 6
14 13 12 11 10 9
UID indication
Power is OFF
RSSI level 2 or more in the 3G mode
RSSI level 0 ~ 1 in the 3G mode
Out of the service range, or the SIM card is not
attached
Condition other than the above
(Receive)
(Full duplex)
In audio/data communication with IP transceivers
(Transmit)
Condition other than the above
1 or more registrations failed
No registration/Connecting
(Receive)
(Full duplex)
In the communication with digital transceivers
(Transmit)
Condition other than the above
1-2
7
8