Voip Call Detail Common Setting - Icom VE-PG2 Instruction Manual

3
VE-PG2 SETTING SCREEN
■ Connection setting (Bridge mode)
3-10 VoIP call detail Common setting (Continued)
ï TOS ���������g
Set the details of TOS (Type-Of-Service) function.
Place the mouse pointer on �Connection setting,�� and then on �VoIP call detail,�� and
then click �Common setting click �Common setting �Common setting�� shown on the list.
q
w
e
q TOS ������
Set the TOS (Type-Of Service) format.
(Default: TOS)
• Not use : Does not use the TOS function.
• TOS : Sends the VoIP packets to TOS field (8 bits) in the IP header using the TOS
format.
• Diffserv : Sends the VoIP packets to TOS field (8 bits) in the IP header using the Diffserv
(Differentiated Service) format.
w M����� (RTP)
Set the Priority level and Service type of the sent VoIP packets.
• Priority level
(Default: 7)
(Selectable range: 0 to 7, 7 is highest priority.)
• Service type
(Default: 0)
(Selectable range: 0 to 15)
e M����� (RTP)
• DSCP
(Default: 56)
(Selectable range: 0 to 63)
[NOTE]
When you click �TOS�� at TOS type (q), the Media (RTP) menu (w) will appear, and
then you can set �Priority level�� and �Service type.��
When you click �Diffserv�� at TOS type (q), the Media (RTP) menu (e) will appear,
and then you can set �DSCP.��
86
�Connection setting,�� and then on �VoIP call detail,�� and Connection setting,�� and then on �VoIP call detail,�� and
: Set the TOS priority level code.
: Set the TOS service type code.
: Set the DSCP (Differentiated Services Code Point) code.
,�� and then on �VoIP call detail,�� and �� and then on �VoIP call detail,�� and and