Before Installation ──────────────1; 1-1.Name And Function Of Component; Name And Function Of Component - Icom SB-110 Instruction Manual

PDF取説-E_1 02.1.23 10:28 ページ2
1
BEFORE INSTALLATION

1-1 Name and Function of Component

q
Ethernet cable/DC cable
Used to connect SB-110 to the wired LAN (Hub).
This cable is for straight connection.
Connect the AC adapter, which comes with SB-110, to the DC cable.
w
[ ] (Red) indicator
Turns on when the connection to SB-110 has been established. The indicator turns off when:
¡
All the radio devices is in no-communication state for one or two minutes.
¡
All the radio devices is out of radio transmission area for one or two minutes.
e
[PWR] (Green) indicator
Turns on when SB-110 turns on.
Blinks alternately with the [MODE] indicator in the [UTILITY] mode operation.
Blinks simultaneously with the [MODE] indicator in the [INITIALIZATION] mode operation.
r
<MODE> button
Use for an operation in the [UTILITY] mode and [INITIALIZATION] mode.
t [
MODE] (Green) indicator
Blinks in the [UTILITY] mode and [INITIALIZATION] mode.
Blinks alternately with the [PWR] indicator in the [UTILITY] mode operation.
Blinks simultaneously with the [PWR] indicator in the [INITIALIZATION] mode operation.
y
[LAN] (Red) indicator
Turns on when the connection to LAN has been established normally.
Turns off when the Ethernet cable is not connected.
Blinks when data is communicated.
※
A plate to fix SB-110 cable. If you connect a commercial ground cable, fix it with the screws for
this plate.
2
q w e r t y
※
PWR MODE
LAN
MODE