Table of Contents
Advertisement
Figure 8 Web Server Authentication window
Enter the User Name: admin and the Password: password and click OK to log into the modem Home Page. Information
about the Unit Status is displayed on the Home Page.
2.6
LTE CONNECTION
Note: Before you begin configuring the Fusion router, you will need an LTE account and an active SIM or UICC card for
each carrier / LTE module installed in the Fusion router.
The Fusion Web interface is divided in two sections. In the left pane is the main navigation menu. On the right is the
content area for the selected page. Initially, information about the Unit Status is displayed.
From the main navigation menu on the left, select WWAN0 to navigate to the WWAN0 page. The Status tab for
WWAN0 is displayed. Select the Carrier Settings tab.
Figure 9 Enable WWAN0 Interface and use Provider #1 for LTE connection
If the interface is not already enabled, in the Configuration section click Enabled and in the same section, click Save to
enable the WWAN0 interface.
| Page 13
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
Advertisement
Table of Contents
