Table of Contents
Advertisement
TCP Server Format
Reports in the specified format (see the table above) are available to local clients that connect to TCP port 6257 of
the Fusion router.
UDP Host (1,2) Format
Reports in the specified format (see the table above) are sent to the specified IP address & port. NOTE: Different
reports can be directed to the same UDP Host address & port.
UDP Host (1,2) Address
IP address of the UDP Host in dotted decimal format.
UDP Host (1,2) Port
IP Port of the UDP Host (1024-65535).
Remote delivery
The Fusion router can be configured to report after a certain time or distance.
Report every () seconds
Trigger the sending of a new remote report if the time since the last remote report exceeds the specified number of
seconds.
Report every () meters
Trigger the sending of a new remote report if the distance since the last remote report exceeds the specified
distance (in meters).
But no less than () seconds between reports
To prevent a fast-moving vehicle from reporting too frequently, a lower limit on the time between reports can be
specified.
TCP Server Format
Reports in the specified format (see the table above) are available to remote clients that connect to TCP port 6258
of the Fusion router.
UDP Host (1,2,3) Format
Reports in the specified format (see the table above) are sent to the specified IP address & port. NOTE: Different
reports can be directed to the same UDP Host address & port.
UDP Host (1,2,3) Address
IP address of the UDP Host in dotted decimal format.
UDP Host (1,2,3) Port
IP Port of the UDP Host (1024-65535).
Store and Forward Settings
The Fusion router can be configured to store position reports when a connection is unavailable (for example, out of
cellular coverage range) and then forward the stored reports when connection is reestablished.
Store and Forward
Enable or disable the Store and forward feature of the Fusion.
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 81
Advertisement
Table of Contents
