Table of Contents
Advertisement
3.6.3 IP SETTINGS
Figure 30 WiFi (Client) – IP Settings
IP Configuration
Mode
Select Dynamic or Static. (If you select Dynamic IP, other entries on this section will be dimmed and automatically
determined by the DHCP host at connection.)
IP Address
Static address for this interface. It must be on the same subnet as the gateway.
Subnet Mask
Will be assigned by the gateway.
MTU
The Maximum Transmit Unit size. Should be left as the default value of 1500 bytes in most cases.
Gateway
IP address of the Gateway (DHCP host). If not known this can be left as all zeros.
DNS Server 1, DNS Server 2
IP address of the DNS server for this unit. If not known, this can be left as all zeros.
NAT Configuration
NAT
Enable or Disable NAT (Network Address Translation)
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 37
Advertisement
Table of Contents
