Table of Contents
Advertisement
Configuration
Interface
Selecting Enabled will enable the wireless client interface. Selecting Disabled will disable it.
Add Access Point
No. (1-10)
A number to assign to the access point
SSID
The SSID of the access point
Authentication
Select authentication method. Options are Shared; WPA-PSK, WPA2-PSK, WPA-Enterprise and WPA2-Enterprise.
WPA2-PSK or WPA2-Enterprise is recommended if security is required.
Encryption
Select the encryption method. Options are None, WEP, TKIP, or CCMP. Depending on the authentication method
selected, some options will not be available here.
WEP Key Length
Available only if the WEP option is selected for encryption. Choose 64 or 128 bit key.
WEP Key Type
Available only if the WEP option is selected for encryption.
WEP Key Index
Available only if the WEP option is selected for encryption.
Passphrase / Key
Key or passphrase, a sequence of words or other text required to connect to the wireless access point.
User
User name used for RADIUS authentication; used in WPA-Enterprise and WPA2-Enterprise.
Password
Password used for RADIUS authentication; used in WPA-Enterprise and WPA2-Enterprise.
Click Add as you complete information for each access point. The access point will be added to the list in the Access
Point Table at the bottom of the tab. To remove an access point from the list, highlight it in the table and select "delete
entry" to the right.
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 36
Advertisement
Table of Contents
