Nat Configuration - CalAmp Fusion User Manual

High-performance multi-band lte router
Hide thumbs Also See for Fusion:
Table of Contents

Advertisement

IP Configuration
Mode
Select Dynamic or Static. (If you select Dynamic IP, other entries on this section will be dimmed and automatically
determined by the carrier's DHCP host at connection.)
IP Address
IP address assigned to this interface.
Subnet Mask
The subnet mask assigned to this interface.
Gateway
IP address of the WAN gateway. If not known, this may be left as all zeros.
DNS Server 1, DNS Server 2
IP address of the (1) preferred and (2) alternate DNS server. If not known, these may be left as all zeros.
MTU
Maximum Transmission Unit, maximum packet size allowed to be transmitted. Should be left as default value of
1500 in most cases.

NAT Configuration

NAT
Enable or Disable NAT (Network Address Translation)
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 46

Advertisement

Table of Contents
loading

Table of Contents