Table of Contents
Advertisement
7. Navigate to the WWAN Firmware tab of the Maintenance page or Status tab of applicable WWAN page(s) as
explained in the following steps to see the updated version number(s) for cell module firmware.
8. Select Maintenance from the main navigation menu to navigate to the Maintenance page. Select the WWAN
Firmware tab.
The WWAN Firmware tab shows the Model number and Firmware Version for each installed cell module.
Figure 82 WWAN0 Cell Module Model and Firmware Version
Figure 83 WWAN1 Cell Module Model and Firmware Version (if a second cell module is present)
9. Select the WWAN page (WWAN0 or WWAN1, as applicable) from the main navigation menu and select the Status
tab.
The Status tab for each WWAN page also shows the Model number and Firmware Version.
Figure 84 WWAN0 Cell Module Model and Firmware Version
Figure 85 WWAN1 Cell Module Model and Firmware Version (if a second cell module is present)
All of the Fusion configuration settings are preserved through the firmware upgrade and the Fusion should return to
functioning the same as it was before the upgrade (only better and with more versatility).
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 105
Advertisement
Table of Contents
