Appendix B - Mechanical Specifications - CalAmp Fusion User Manual

APPENDIX B — MECHANICAL SPECIFICATIONS
Following tables and figures show overall dimensions of the chassis and mounting bracket options for the Fusion
router. Mounting brackets allow the Fusion to be secured to any surface that can be drilled for this purpose. The
drawings may be used for layout reference, but it is advised that a physical comparison be made to the unit and
bracket before laying out and drilling mounting holes.
Table 13 Overall Dimensions of the Fusion
Dimension Inches
Height 1.90
Width 6.00
Depth 5.50
Depth 5.28
(Chassis only)
Side tapped mounting hole location detail — typical both
sides.
#8-32 UNC – 2B thread × 0.30 in. (0,76 cm) depth
2 holes for mounting both sides (4 holes total).
Centimeters
4,83
15,2
14,0
13,4
Tapped mounting hole location detail — top only.
Figure 71 Fusion overall dimensions
#6-32 UNC – 2B thread × 0.12 in. (0,30 cm) depth
4 holes for mounting (top surface only).
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 93