System Information; Interface Information - CalAmp Fusion User Manual

High-performance multi-band lte router
Hide thumbs Also See for Fusion:
Table of Contents

Advertisement

Figure 12 Fusion Web interface Unit Status page

System Information

Unit ID
User-defined name given to the unit for ease of reference and used by various services.
Local Time
Displays the current date and time (UTC) as received from the GPS receiver.
System Up time
Displays the duration the system has been up in hours, minutes, and seconds.
Software Version
Displays the current system firmware version loaded. Please visit
Default Route
Displays the name of the WAN interface used as the default route. This value can change dynamically, based on the
available WANs and WAN failover rules specified.

Interface Information

Interface
Name of the interface.
State
Displays the current state of the interface. Possible states are listed in the following table.
IP Address and Subnet Mask
Displays the IP address and subnet mask of the interface.
Important concept: Note that the Fusion acts as a router between each of its interfaces, ETH0, ETH1, ETH2, WiFi,
WWAN0, and WWAN1 (when installed and active), not as a switch or hub. Each of these interfaces, when enabled,
www.calamp.com
for the latest updates.
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 16

Advertisement

Table of Contents
loading

Table of Contents