Table of Contents
Advertisement
Add Custom IP Filter
No. (1-20)
A number to assign to the custom IP filter. This number may be any number from 1 to 20, inclusive, that has not
been assigned to another custom IP filter.
Source IP Address
If Any is selected, any source IP address will satisfy this filter.
A specific host IP address can also be specified, or a range of IP addresses via a bitmask (the box following the /).
If the Exclude box is checked, it means that in order for a packet to match this filter, it must not have the specified
source IP address (or not be in the specified range of IP addresses).
Destination IP Address
If Any is selected, any destination IP address will satisfy this filter.
A specific IP address can also be specified, or a range of IP addresses via a bitmask (the box following the /).
If the Exclude box is checked, it means that in order for a packet to match this filter, it must not have the specified
source IP address (or not be in the specified range of IP addresses).
Protocol
Any: Any protocol number.
ICMP: The ICMP protocol (1).
TCP: The TCP protocol (6).
UDP: The UDP protocol (17).
Other: Any other IP protocol.
If the Exclude box is checked, it means that in order for the packet to match this filter, it must not have the specified
protocol number.
Source Port
Any: Any source port number.
Specific: Select a specific source port number.
Range: Select a range of source port numbers.
If the Exclude box is checked, it means that in order for the packet to match this filter, it must not have the specified
source port number (or not be in the specified range of source port numbers).
Destination Port
Any: Any destination port number.
Specific: Select a specific destination port number.
Range: Select a range of destination port numbers.
If the Exclude box is checked, it means that in order for the packet to match this filter, it must not have the specified
destination port number (or not be in the specified range of destination port numbers).
Direction
The direction of the path taken by the IP packet inside the Fusion router.
Any: Any direction.
An ingress interface sets which interface a packet must arrive on to match the filter, and/or egress sets which
interface the packet must be forwarded on. A specific ingress (packet entering the Fusion) and egress (packet
leaving the Fusion) can also be specified.
If the Exclude box is checked, it means that in order for the packet to match this filter, it must not be processed in
the specified direction.
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 60
Advertisement
Table of Contents
