Carrier Settings - CalAmp Fusion User Manual

3.7.2 CARRIER SETTINGS

For each WWAN interface, up to four LTE providers can be specified. Fusion will attempt to connect to each in
succession when the interface is enabled.
Figure 35 WWAN0 /WWAN1 – Carrier Settings
Configuration
Interface
Selecting Enabled will enable the Wireless interface. Selecting Disabled will disable it.
Provider #1, Provider #2, Provider #3, Provider #4
Use
Enabled — the Fusion will attempt connection using the provider information entered in the section.
Disabled — the Fusion will not attempt connection using information entered in the section.
If more than one provider is enabled, connection attempts are made with each until one succeeds or all have been
tried. Connection attempts then continue with the first. Normally only one network service provider should be
enabled.
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 44