CalAmp Fusion User Manual page 13

Bottom row, from left to right:
Panel label Connection
GPS SMA
Power 4-pin locking
USB USB A
ETH0 RJ-45
ETH1 RJ-45
ETH2 RJ-45
Figure 6 Rear panel connections
Table 7 Rear panel connectors
Panel label Connection
I/O 10-position
terminal socket
Console USB Mini-B
Setup Push button
Status LED
SIM/SVC (left) SIM card slot
WWAN0 USB Mini-B
SIM SVC (right) SIM card slot
WWAN1 USB Mini-B
Description
GPS Receive antenna
Power, ignition sense, and alarm input
2 USB Host connectors (for future use)
Ethernet 10/100 Mbps
Ethernet 10/100 Mbps
Ethernet 10/100 Mbps
Description
2 digital inputs/outputs, 2 analog inputs, 2 outputs (processor-controlled
internal relays)
Mini-USB device port used for debug only
Push-button Reset / Force Factory Settings
Bicolor Status LED
Slot and tray for mini SIM card for module in WAN slot 0
Service port, direct connection to WWAN0 module
Slot and tray for mini SIM card for module in WAN slot 1
Service port, direct connection to WWAN1 module
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 7