Usb Log - CalAmp Fusion User Manual

3.13.8 USB LOG

The USB Log tab provides a way to save log information to a USB flash drive. Log information is useful when contacting
CalAmp Technical Support to resolve operational problems.
Figure 70 Maintenance – USB Log
USB log
Logs
Enable or disable writing log information to a USB flash drive. Logging is then automatically activated or deactivated
with the insertion or removal of USB flash drive to or from either of the two USB A ports in the front panel of the
Fusion router.
Events
Select the type of information to be written to the USB flash drive.
– GPS – Periodically write GPS status to the log.
– Interface – Write all changes in interface states.
– WWAN – Periodically write WWAN interface status information.
– Router – Write all changes to the default route.
Control
Always click Eject USB Flash Drive and wait a few moments before removing the USB device from the front panel.
This is recommended to properly stop the USB interface. Failure to stop the USB interface before disconnecting
could cause file corruption on the USB device and cause data loss or make the USB device unusable.
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 90