Table of Contents
Advertisement
3.13.5 UNIT CONFIGURATION
The Unit Configuration tab allows you to save parameters (settings in the Fusion Web interface) of the Fusion to a file.
Conversely, if you have saved settings from the Fusion to a file, you can Import these previously-saved configuration
settings to the Fusion.
CAUTION: At the time of this writing, use of Internet Explorer 7, Internet Explorer 9, and Internet Explorer 10 browsers
are not recommended for backup ("Save As" as explained in Unit Parameters below) or for importing unit parameters
("Browse..." as explained in Import Unit Parameters below).
Figure 67 Maintenance – Unit Configuration
Parameters
Unit Parameters
Right-click the link and you will be asked for a destination location for the file to be downloaded. Download the file
and you will have a backup of the current configuration settings for your Fusion.
Import Unit Parameters
Enter the path and filename for the previously-saved Fusion Configuration file, or use the Browse button and
navigate to it, and click Apply to import configuration parameters. Click Cancel to clear the field and not import
parameters.
Note: After importing some parameters, some services will be restarted and can cause the WWAN interfaces to be
restarted, causing a communication outage. This can take up to 30 seconds to be restored.
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 86
Advertisement
Table of Contents
