Table of Contents
Advertisement
Action
Keep – If IP filtering is enabled and an IP packet matches all criteria in the IP filter, keep the IP packet (continue
normal processing of the IP packet).
Drop – If IP filtering is enabled and an IP packet matches all criteria in the IP filter, drop the IP packet.
Click Add as you complete information for each IP filter. The IP filter will be added to the list in the Custom IP Filter
Table at the bottom of the tab. To remove an IP filter from the list, click Clear next to it in the table.
3.9.6 STATIC ROUTING
Static Routing refers to a manual method of setting up routing between networks. Select the Static Routing tab to add
static routes to the Static Route Table. Static routes may be defined using the Static Routing fields and appear in the
table at the bottom of the tab.
Figure 48 Router Settings – Static Routing
Add Static Route
No. (1-20)
A number to assign to the static route. This number may be any number from 1 to 20, inclusive, that has not been
assigned to another static route.
Description
Description of the static route in the Static Route table.
IP Address
IP address of the destination network.
Subnet Mask
Subnet mask of the destination network.
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 61
Advertisement
Table of Contents
