Table of Contents
Advertisement
1.4
MECHANICAL SPECIFICATIONS
The following table and figure show overall dimensions of the chassis of the Fusion Multi-Network LTE Router.
Dimensioned drawings of the chassis with mounting options (bracket, mounting plate, or DIN rail mount) are provided
in APPENDIX B. The drawings and associated data may be used for layout reference, but it is advised that a physical
comparison be made to the unit and bracket before laying out and drilling any holes.
Table 1 Fusion chassis overall dimensions
Dimension
Inches
Height
1.90
Width
6.00
Depth
5.50
(Overall)
Depth
5.28
(Chassis only)
Figure 3 Side tapped mounting hole location detail — typical
both sides.
#8-32 UNC – 2B thread × 0.30 in. (0,76 cm) depth
2 holes for mounting both sides (4 holes total).
Centimeters
4,83
15,2
14,0
13,4
Figure 4 Tapped mounting hole location detail — top only.
Figure 2 Fusion router Mechanical Drawing
#6-32 UNC – 2B thread × 0.12 in. (0,30 cm) depth
4 holes for mounting (top surface only).
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 4
Advertisement
Table of Contents
