Table of Contents
Advertisement
Add Rule
No.
Number assigned to each rule. This number may be any number from 1 to 20, inclusive, that has not been assigned
to another rule.
Protocol
The data protocol of the rule. TCP, UDP, or both.
Source IP Address
Specifies a WAN IP address that is allowed to access the modem.
Caution: If set to 0.0.0.0, this allows all WAN IP addresses access to the modem.
Public Port Number Range
Sets the external port number range for incoming requests.
Note: Port Forwarding rules take precedence over the services specified in Security » IPsec or RADIUS.
Private IP Address
Sets the LAN address of a device connected to one of the Fusion's LAN interfaces. Inbound requests will be
forwarded to this IP address.
Private Port Number Range
Sets the LAN port number range used when forwarding to the destination IP address.
As you complete entry of each rule, click Add to save it.
Rule Table
Rules that have been created appear in the rule table at the bottom of the tab.
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
| Page 56
Advertisement
Table of Contents
