Wwan Firmware - CalAmp Fusion User Manual

3.13.3 WWAN FIRMWARE

Figure 65 Maintenance – WWAN Firmware
WWAN0 Installed Firmware
Displays the model and firmware version for the cellular module installed in the WWAN0 position in the Fusion, if
installed, and version information when available from the cell module.
WWAN1 Installed Firmware
Displays the model and firmware version for the cellular module installed in the WWAN1 position in the Fusion, if
installed, and version information when available from the cell module.
Upgrade WWANx Firmware
When newer versions of cell module firmware that are supported by CalAmp and the cell provider become available,
the user can download the firmware from CalAmp and manually update the cell module by uploading the new
firmware package to it.
Detailed information and procedures for performing manual firmware upgrades is provided in APPENDIX D — Firmware
Upgrades.
Note: The WWAN interface will be temporarily disabled for the duration of the upgrade, which may require up to 15
minutes to complete. Unless otherwise stated, the user is not expected to take any special precautions.
Caution: It is important to have a stable power source and ensure that power to the Fusion is not interrupted during a
firmware upgrade.
| Page 84
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B