Table of Contents
Advertisement
1
PRODUCT OVERVIEW
Fusion offers a single, flexible platform to address a variety of wireless communications needs with over-the-air
configuration and system monitoring for optimal connectivity. This ready-to-deploy broadband router enables wireless
data connectivity over public and private LTE cellular networks at 4G speeds.
For the ultimate in versatility, the Fusion provides high-speed 4G LTE public safety band 14 broadband connectivity for
private infrastructure as well as 700 MHz Band 13 or 17 and 1700/2100 MHz AWS Band 4 (with 3G EV-DO/HSPA
fallback modes) based on 3GPP Standard E-UTRA Release 8 technologies. Three Ethernet ports support LAN
configurations that provide for the unique requirements of third-party VPN middleware providers.
An optional 802.11 b/g/n WiFi interface access point and client operations supports connectivity to IP applications in a
variety of different connection scenarios. Dual USB 2.0 host interfaces are provided to support Serial IP communication
(using the supported USB to RS-232 Converter cable accessory) and writing event log files to a USB flash drive.
Anticipated future uses include connection of other optional USB peripherals such as ZigBee or Bluetooth adapters.
The Fusion includes an easy to use web-based management and configuration interface, and comprehensive remote
management facilities are available. Cellular/WiFi/Ethernet rule-based and application port-based switching enables IP
control such as segregating traffic specific to designated bearer networks and choosing the WAN fallback order. The
Fusion aggregates WANs, including CalAmp's narrowband technology, making it a powerful and unique enabler of
interoperable network technologies.
The Fusion includes an IP router that facilitates traffic routing between all of the concurrently operating networks. The
integrated router simplifies installation cabling requirements by requiring only a single cable connection with onboard
computing equipment, and offloading routing processor burdens and setup complexities. The Fusion fully integrates
with CalAmp Gemini narrowband equipment to extend their functionality to include LTE connectivity and access
additional Fusion peripherals.
1.1
MODULE IDENTIFICATION
The module identification label can be found on the bottom of your Fusion device. This label contains the product part
number, the serial number, FCC and IC IDs as well as carrier specific information that will be required when activating
your data account. The following is a sample portrayal of the identification label; identifiers and their placement will
vary depending on model and installed options, and actual bar-coded numbers on each unit will differ.
Figure 1 Fusion identification label example
| Page 1
Fusion Multi-Network LTE Router PN 001-0000-602 Rev. B
Advertisement
Table of Contents
