3Com Switch 4800G 24-Port Configuration Manual page 42

42 C 2: L
HAPTER OGGING
I T C P
N HROUGH THE ONSOLE ORT
To do...
Configure the Enter the default ISP
authentication domain view
mode
Specify the AAA
scheme to be applied to
the domain
Quit to system view
Create a local user (Enter local user view.) local-user user-name
Set the authentication password for the
local user
Specify the service type for AUX users
Quit to system view
Enter AUX user interface view
Configure to authenticate users locally or
remotely
Use the command...
domain Domain name
authentication default
{ hwtacacs- scheme
hwtacacs-scheme-name
[ local ] | local | none |
radius-scheme
radius-scheme-name
[ local ] }
quit
password { simple |
cipher } password
service-type terminal
[ level level ]
quit
user-interface aux 0
authentication-mode
scheme [ command-
authorization ]
Remarks
Optional
By default, the local AAA
scheme is applied. If you
specify to apply the local
AAA scheme, you need
to perform the
configuration
concerning local user as
well.
If you specify to apply an
existing scheme by
providing the
radius-scheme-name
argument, you need to
perform the following
configuration as well:
Perform AAA-RADIUS
■
configuration on the
switch. (Refer to
"AAA/RADIUS/HWTA
CACS Configuration"
on page 747 for
more.)
Configure the user
■
name and password
accordingly on the
AAA server. (Refer to
"Configuring AAA"
on page 758.)
Required
No local user exists by
default.
Required
Required
-
-
Required
The specified AAA
scheme determines
whether to authenticate
users locally or remotely.
Users are authenticated
locally by default.